中文核心期刊

中国科技核心期刊

CSCD来源期刊

DOAJ 收录

Scopus 收录

王建其, 柳小明. X射线荧光光谱法分析不同类型岩石中10种主量元素的测试能力验证[J]. 岩矿测试, 2016, 35(2): 145-151. DOI: 10.15898/j.cnki.11-2131/td.2016.02.006
引用本文: 王建其, 柳小明. X射线荧光光谱法分析不同类型岩石中10种主量元素的测试能力验证[J]. 岩矿测试, 2016, 35(2): 145-151. DOI: 10.15898/j.cnki.11-2131/td.2016.02.006
Jian-qi WANG, Xiao-ming LIU. Proficiency Testing of the XRF Method for Measuring 10 Major Elements in Different Rock Types[J]. Rock and Mineral Analysis, 2016, 35(2): 145-151. DOI: 10.15898/j.cnki.11-2131/td.2016.02.006
Citation: Jian-qi WANG, Xiao-ming LIU. Proficiency Testing of the XRF Method for Measuring 10 Major Elements in Different Rock Types[J]. Rock and Mineral Analysis, 2016, 35(2): 145-151. DOI: 10.15898/j.cnki.11-2131/td.2016.02.006

X射线荧光光谱法分析不同类型岩石中10种主量元素的测试能力验证

Proficiency Testing of the XRF Method for Measuring 10 Major Elements in Different Rock Types

  • 摘要: 以28个不同类型岩石标样作外标, 用玻璃熔片法制样, 采用经验系数法进行基体校正, 建立了X射线荧光光谱法(XRF)测定不同类型岩石中硅铝钙镁等10种主量元素的分析方法。该方法被用于参与GeoPT分析测试能力验证, 15年来分析了23个不同类型的岩石验证样品。经验证该方法对SiO2、Al2O3、K2O和CaO具有非常好的分析效果(所有测定结果的|Z| < 2);对于MgO、MnO、TiO2和Na2O四个元素, 尽管各有一个样品的分析结果的|Z|>2, 这主要是样品与标样的基体差异较大造成了低含量样品测定结果超差, 但依然可获得好的分析效果; 当TFe2O3>1.0%, P2O5含量在0.08%~0.80%区间时, 分析结果的|Z| < 2, 满足分析期望。总体上所建立的XRF分析方法稳定, 可满足应用地球化学实验室测试不同类型岩石中10种主量元素的分析期望。

     

    Abstract: The X-ray Fluorescence Spectrometry (XRF) method was adapted for the determination of 10 major elements, such as silicon, aluminum, calcium and magnesium, in different types of rocks. The calibration curves were determined from 28 different types of rock standards which were fused into glass beads. The matrix effect was calibrated by using empirical factors. This method was used for determining the 10 major elements of samples from GeoPT proficiency testing. The 23 types of rock samples were analyzed over 15 years and the results indicate that this method is most effective in determining SiO2, Al2O3, K2O and CaO with the obtained|Z| < 2 for all samples. This method is also suitable for determining MgO, MnO, TiO2 and Na2O although each element has only one suspect result in different samples with the obtained|Z|>2, which was caused by the matrix difference between samples and standard samples in measuring the lower content elements. When the content of TFe2O3 is higher than 1.00% and P2O5 between 0.08% and 0.80%, the results can match expectations (the obtained|Z| < 2). To sum up, the developed XRF method has long term stability and is effective, which can match the expectation of applied geochemistry laboratories for determination of 10 major elements in different types of rock samples.

     

/

返回文章
返回